TMY-4
TMY-4, Clevis and Yoke Ends, Male, 1/4-28 RH, 0.250 Pin Holes Zinc Yellow Plating Forged Construction
Construction: Male Yoke Ends are forged or cast from low carbon steel, and are then machined to the above specifications.Standard designs are plated zinc with yellow dichromate.
Left Hand Threads: designate by an "L" as in TMYL-6.
Specials: Special housing sizes and configurations are available in any volume. Different rod diameters and lengths can be welded to the parent forging to achieve any length. Pin hole sizes can be modified easily and cost effectively. Note: avoid changing the following dimensions: D, E, F and I.
California Residents: WARNING
1/4-28 RH
0.250 Pin Holes
Zinc Yellow Plating
Forged Construction
| Threads | XY | XX | A | B | D | E | F | H | I | Plating |
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4-28 RH | 1.000 | 2.500 | 1.750 | 0.250 | 0.625 | 0.281 | 0.625 | 0.250 | 0.500 | Zinc Yellow |
Product Accessories
 D-Ring Shackles |
 Isolated Rod Ends |
 Nuts |
 Threaded Tubes |
Clevis Pin Clips |
 Clevis Pins - Standard and Grooved Specials |
 Thread Bungs |
 Clevis Spring Pins |
| Ships From | Quantity | 1 | 2 | 3 | 4 | 5 | 10 | 25 | 50 | 100 | 200 | 300 | 600 | 1500 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
$16.27 | $10.33 | $8.74 | $8.32 | $8.07 | $5.85 | $5.07 | $3.82 | $3.39 | $3.09 | $2.69 | $2.30 | $2.26 | |
| Bushnell, IL USA | In Stock? |  |
|
|
|
|
|
|
|
|
|
|
|
|
 |
£13.06 | £8.30 | £7.03 | £6.70 | £6.50 | £4.72 | £4.10 | £3.10 | £2.75 | £2.51 | £2.19 | £1.88 | £1.85 | |
| Witney, Oxon UK | In Stock? | |
|
|
|
|
|
|
|
|
|
|
|
|
Similar Products
 |
SS-PMC-4-3Clevis and Yoke Ends |
|
||||||||||||||||||||||||||||||||||||
|
PMC-4-3Clevis and Yoke Ends |
|
Interchangeable With
Caterpillar 7J435 7J-0435 Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends, Horquillas, Cabezal de Sello Metrico, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, DIN 71751, DIN 71752, Forcelle con foro Filettato, forged clevis end, forged yoke end, Gabelgelenke, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, ISO 8140, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends.