MJR-375-ZY

  • Clevis and Yoke Ends Female 3/8-24 RH
  • MJR-375-ZY, Clevis and Yoke Ends, Female, 3/8-24 RH, 0.375 Pin Holes Offset Zinc Yellow Plating Forged Construction

MJR-375-ZY, Clevis and Yoke Ends, Female, 3/8-24 RH, 0.375 Pin Holes Offset Zinc Yellow Plating Forged Construction

Application: adjustable yoke ends (also called "clevis ends") are typically assembled to the end of a rod, pipe, tube or cable linkage and are then attached via a clevis pin to a mounting point. This particular yoke design is called an adjustable offset yoke since the threaded barrel is located to one side of the jaws as opposed to running into the jaws. Construction: forged or cast, low carbon steel. Per SAE J493 Finish/Plating Code: the suffix of the part number indicates the plating color (i.e., 280377 would be zinc yellow). Codes: 77 = zinc yellow 80 = zinc clear Specials: almost any type of pin hole or thread can be put into a yoke end at a very reasonable cost. Modifications to the actual housing dimensions require large volumes to remain economical.

3/8-24 RH

0.375 Pin Holes

Offset

Zinc Yellow Plating

Forged Construction

Weight (lbs): 0.18

Threads Plating A B D E F G H K
3/8-24 RH Zinc Yellow 2.000 0.625 1.625 0.438 0.875 0.375 0.688 0.640


Product Accessories

Ships From Quantity 1 2 3 4 5 10 25 50 75 100 150 250 500 1000
US Stock $17.11 $13.43 $12.60 $10.70 $10.45 $8.03 $5.96 $5.27 $5.24 $4.93 $4.76 $4.16 $3.56 $3.49
Bushnell, IL USA In Stock? In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock Out of Stock Out of Stock Out of Stock
UK Stock £10.20 £8.03 £7.54 £6.42 £6.27 £4.84 £3.61 £3.21 £3.19 £3.01 £2.91 £2.55 £2.20 £2.16
Witney, Oxon UK In Stock? Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock Out of Stock


Similar Products




0 reviews

Write a review

Note: HTML is not translated!
    Bad           Good

Interchangeable With

Caterpillar 2K0400 2K-0400, 423353, 255-4525, JI Case CNH New Holland L11182, 6N200AF-6F-6Y Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends, Horquillas, Cabezal de Sello Metrico, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, DIN 71751, DIN 71752, Forcelle con foro Filettato, forged clevis end, forged yoke end, Gabelgelenke, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, ISO 8140, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends.