280677

280677, Clevis and Yoke Ends, Female 1/2-20 RH 0.500 Pin Holes Zinc Yellow Plating Forged Construction

Application: adjustable yoke ends (also called "clevis ends") are typically assembled to the end of a rod, pipe, tube or cable linkage and are then attached via a clevis pin to a mounting point. Construction: forged low carbon steel. Per SAE J493 Finish/Plating Code: the suffix of the part number indicates the plating color (i.e., 280377 would be zinc yellow). Codes: 77 = zinc yellow 80 = zinc clear, ZCHF = zinc clear hex free (ROHS) Specials: almost any type of pin hole or thread can be put into a yoke end at a very reasonable cost. Modifications to the actual housing dimensions require large volumes to remain economical. Other names: Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends

California Residents: WARNING

1/2-20 RH

0.500 Pin Holes

Zinc Yellow Plating

Forged Construction

Weight (lbs): 0.33

Thread Plating A B D E F G H I J
1/2-20 RH Zinc Yellow 3.000 0.813 1.875 0.563 1.125 0.500 3.46 0.938 0.250


Product Accessories

FOB Point Quantity 1 2 3 4 8 12 20 100 200 300 400 500 900 2500
US Stock $19.62 $12.66 $10.83 $10.42 $7.57 $6.74 $6.58 $4.40 $4.00 $3.49 $3.48 $2.98 $2.98 $2.93
Bushnell, IL USA In Stock? In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock


Similar Products




0 reviews

Write a review

Note: HTML is not translated!
    Bad           Good

Interchangeable With

6071K26, 8N300A adjustable yoke end, Caterpillar 6F-7010 6F7010, Steiger 8732642, Grove 7-308-000013, General Motors 99-0104039, B27086ANFZ, B27086B, 175-601-230, 8N300A-8F-8Y, 00128-0006-00, 0590005281, 8882-1006, AC230, 8N300A-8F-8Z, GAFT21158, HCL-1444, MS35812-11, John Deere T21158, JI Case CNH New Holland 97015-5 213-218, 213-228, 213-118, 213-128, IH International Harvester 453488, 104039, 144245, 213-6, Agco 866236, 8N300A-8F-8Z, 1583K16, EZ Go 10385-G9, Bobcat 2J8403, Hyster 152, Toro 100-7338, Norcross 8N300A, 2708-6A, Versatile 20453, Simplicity 2154304, Leach 3K-475, Trak 8301210, Gradall 2464-1352 Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends, Horquillas, Cabezal de Sello Metrico, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, DIN 71751, DIN 71752, Forcelle con foro Filettato, forged clevis end, forged yoke end, Gabelgelenke, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, ISO 8140, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends.