280377

280377, Clevis and Yoke Ends, Female 3/8-24 RH 0.375 Pin Holes Zinc Yellow Plating Forged Construction

Application: adjustable yoke ends (also called "clevis ends") are typically assembled to the end of a rod, pipe, tube or cable linkage and are then attached via a clevis pin to a mounting point. Construction: forged low carbon steel. Per SAE J493 Finish/Plating Code: the suffix of the part number indicates the plating color (i.e., 280377 would be zinc yellow). Codes: 77 = zinc yellow 80 = zinc clear, ZCHF = zinc clear hex free (ROHS) Specials: almost any type of pin hole or thread can be put into a yoke end at a very reasonable cost. Modifications to the actual housing dimensions require large volumes to remain economical. Other names: Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends

California Residents: WARNING

3/8-24 RH

0.375 Pin Holes

Zinc Yellow Plating

Forged Construction

Weight (lbs): 0.16

Thread Plating A B D E F G H I J
3/8-24 RH Zinc Yellow 2.500 0.625 1.625 0.438 0.875 0.375 2.83 0.688 0.188


Product Accessories

FOB Point Quantity 1 2 3 4 5 10 30 50 80 160 240 480 960 1200 2400
US Stock $16.14 $10.24 $8.65 $8.24 $7.99 $5.79 $3.85 $3.79 $3.37 $3.15 $3.05 $2.66 $2.27 $2.27 $2.23
Bushnell, IL USA In Stock? In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock


Similar Products




0 reviews

Write a review

Note: HTML is not translated!
    Bad           Good

Interchangeable With

6071K14, 6N208A adjustable yoke end, Hay Forage 86625043, B27084AZ, B27084A, Caterpillar 1A-9252 Yoke Type Rod End, 175-601-218, 06-1500-08, 00128-004-00, 6N208A-6F-6Y, 16710-001-1ZN, 8882-1004, W942483-4, 6N208A-6F-6Y, Exmark 1-633131, 633131, Grasshopper 265545, John Deere M80373, Wright Manufacturing 12990014, JI Case CNH New Holland 42130 213-116, 213-126, 213-126, 213-726, International Harvester IH 104038, 144243, 144264, 24675R1, 213-4, 213-41, Steiger 19-138, EZ Go 10385-G7, Bobcat 2J6208, Hyster 141, Dixon 9723, Sperry New Holland 042130, Toro 282-22, Trak International 8301004 Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends, Horquillas, Cabezal de Sello Metrico, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, DIN 71751, DIN 71752, Forcelle con foro Filettato, forged clevis end, forged yoke end, Gabelgelenke, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, ISO 8140, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends.