280177

280177, Clevis and Yoke Ends, Female 1/4-28 RH 0.250 Pin Holes Zinc Yellow Plating Forged Construction

Application: adjustable yoke ends (also called "clevis ends") are typically assembled to the end of a rod, pipe, tube or cable linkage and are then attached via a clevis pin to a mounting point. Construction: forged low carbon steel. Per SAE J493 Finish/Plating Code: the suffix of the part number indicates the plating color (i.e., 280377 would be zinc yellow). Codes: 77 = zinc yellow 80 = zinc clear, ZCHF = zinc clear hex free (ROHS) Specials: almost any type of pin hole or thread can be put into a yoke end at a very reasonable cost. Modifications to the actual housing dimensions require large volumes to remain economical. Other names: Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends

California Residents: WARNING

1/4-28 RH

0.250 Pin Holes

Zinc Yellow Plating

Forged Construction

Weight (lbs): 0.07

Thread Plating A B D E F G H I J
1/4-28 RH Zinc Yellow 2.000 0.438 1.250 0.281 0.625 0.250 2.21 0.500 0.141


Product Accessories

FOB Point Quantity 1 2 4 6 8 10 20 30 50 100 200 400 600 1600 4000
US Stock $13.65 $8.41 $6.58 $6.17 $5.24 $5.11 $3.93 $3.85 $2.91 $2.57 $2.41 $2.04 $2.03 $1.73 $1.70
Bushnell, IL USA In Stock? In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock In Stock Out of Stock


Similar Products




0 reviews

Write a review

Note: HTML is not translated!
    Bad           Good

Interchangeable With

John Deere M3742T, 2A-AC, JI Case CNH New Holland 86520436, 5280, JI Case CNH New Holland 213-124 and 213-00124, 213-31, YEA19505, 14595-1, 000-40084-0001, 08-0013-01, 175-601-206, 9313968, AC206, MS35812-2, 22183, Caterpillar 8B3768 8B-3768, 175-601-206, 1310036957, 766410, Gradall 882-1002, 766140, LK334-2, 10737, Nacco Hyster 125 and 0000125, 56407133, 029025-002, 732-1405, 2791-001-1, 06-002, 6071K12, 4N200A adjustable yokes, B27082A, B27082AZ, 49003-1, 06-1500-01, 4N200A-4F-4Y, 124-93, 133337, 14540, 14595-1, 2597, 2791-001-1, 2A-AC, 2J-4200H, 2J004200B, Caterpillar 2J4200 2J-4200, 30-3037436, 69105, 9763-00, AC206, R42282, 8882-1002, 4N200A-4F-4Y, Tyler 29258, Agco 766410, EZ Go 10385-G2, Bobcat 2J4200, Trak 8301002 Horquillas Forjadas, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, forged clevis end, forged yoke end, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends, Horquillas, Cabezal de Sello Metrico, adjustable clevis ends, adjustable yoke ends, billet ends, billet linkage, billet rods, cable end, cable yoke end, cetop G3, chapes, clevis end, clevis rod end bearing, clevis rod ends, clevis yoke, DIN 71751, DIN 71752, Forcelle con foro Filettato, forged clevis end, forged yoke end, Gabelgelenke, gabelkopf, gabelkopfe, gelenkkopf, gelenkkopfe, heavy duty yoke linkages, ISO 8140, linkage design, linkage ends, machined steel clevises, mechanical controls, plated yoke ends, plated linkages, rod end clevis, rod ends, sae clevis ends, sae yoke ends, splintbolzen, throttle yoke end, throttle rod end, threaded clevises, yoke ends.